亚洲九九九,色偷偷亚洲女人的天堂,丁香五月缴情在线

What is the daily maintenance of BYD environmentally friendly electric forklifts?- 5

When the diodes in the two leftmost grids flash alternately, it means that the power is low and the battery needs to be charged

Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

Use brushless DC motor to control the drive system

In the future, the three types of vehicles will have more configurations and development The use of electric pallet forklift is not difficult, it is nothing more than practice makes perfect

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

? High-quality hydraulic pump station with buffer, low noise, small vibration, good sealing, smooth and reliable lifting and lowering Prevent vehicles from carrying people; 7

If any abnormal condition is found in the forklift, stop and check it immediately

Before using the explosion-proof electric forklift, it is necessary to conduct a safety inspection on the explosion-proof electric forklift to ensure that the equipment is in good condition and the operation is safe and reliable

Just remove two bolts and take off the rear cover, and the main key components can be immediately inspected and repaired

It can be driven electrically, but it requires manual lifting by our operators, which is more convenient and quick to operate

Models with fixed platforms are also available

What is the daily maintenance of BYD environmentally friendly electric forklifts?-

The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

Stacking forklifts have a gantry, but unlike other lifting forklifts, they do not have a cab, mainly for flexible handling and stacking operations

When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness Overhead guards and shelf guards must be complete and effective As for which truck to choose, companies need to make a purchase based on their actual work Grind the crack until the metallic luster is exposed If you don't understand, you can also ask: Forklift manufacturer

5-5

When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating

During normal use, pay attention to the insulation of the battery

During operation, the driving speed can be reasonably controlled to meet different usage rhythms 3

The rapid development of the logistics industry requires a forklift with short charging time, long use time, stable performance, ability to withstand high-intensity operations, and high degree of automation and intelligence

Electric forklifts are now very commonly used logistics and warehousing equipment

What is the daily maintenance of BYD environmentally friendly electric forklifts?- Many customers don't know that the main mechanism of metal corrosion is the conversion of raw metal into metal oxides, which causes structural parts or components to rust, damage, or even become irreparable and scrapped

Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

Make more comparisons and choose the one that suits you best and has the best cost-effectiveness

Therefore, the competition among manufacturers in the current market is also fierce

, Ltd

If the motor is not checked, it may overheat during use, shortening the life of the motor

The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm

If the operator mistakenly operates the direction backward and the body does not have time to avoid, the operating arm and the body will collide, the control switch will be closed, and the electric pallet truck will brake urgently

, Ltd For example, in the logistics of pharmaceutical products, pharmaceutical logistics warehousing has the characteristics of high environmental requirements, high distribution frequency, and timely distribution

The most obvious point is that you can see that their parameter tables are basically the same

Changing from a lead-acid battery forklift to a lithium-ion forklift is not a simple battery switch

As for whether to choose a single-sided or double-sided pallet, it should be selected according to the type and configuration of the forklift

They are especially suitable for food, fishery, medical, chemical and other places

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info