尤物视频在线播放,日本毛x片免费视频观看视频,成人无码区免费视频网站

BYD all electric forklift maintenance- If you want to buy a cost-effective electric transporter with low price, good quality and good service, you should first refer to the production strength of the manufacturer

It is a power technology update driven by the concept of energy conservation and environmental protection

After lowering the forks to the lowest position, withdraw the electric pallet truck

The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

Mastering these methods during daily use can shorten the time for equipment failure repair and reduce maintenance costs

(2) For forklifts manufactured before December 1, 2023, it is not required to install safety monitoring devices, and the regular (initial) inspection may not include the corresponding items

Finally, regardless of the price of the forklift, it is forbidden to use it in flammable, explosive places or corrosive environments with strong acidity or alkalinity

From raw materials, to battery cells, module structure, to the overall manufacturing process, and ultimately marketing, BYD can be said to have maintained its core competitiveness in every process 4, focusing on the development requirements of "steady" and "slow" High-quality electronic control system is responsive and easy to control

Compared with imported electric trucks, domestic electric trucks generally do not have a power steering system installed

However, the development of lithium battery forklifts still has many technical bottlenecks

BYD all electric forklift maintenance- In general, electric pallet trucks are still worth buying, which can improve work efficiency and save costs

Electric pallet trucks can be divided into two categories: semi-electric transport trucks and full-electric transport trucks

In the new "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the regular inspection cycle of forklifts will be adjusted from the original 1 year to 2 years

Lifting structure The lifting structure is mainly composed of a gantry and a fork Warehouse work is increasingly inseparable from 3-ton electric forklifts, because the introduction of electric equipment will greatly improve work efficiency and save costs It is suitable for operations in workshops and warehouses

He believes that, except for a few companies, the overall technical level of domestic lithium-ion forklifts is not high

warn! Do not operate an electric pallet truck with serious functional defects that endanger safety

The advantages of zero emissions, long battery life, fast hydrogen refueling, and low noise have attracted the attention of forklift manufacturers

Then tighten the brake mounting screws

The forklift adopts an all-steel structure as a whole, and the surface is coated with anti-corrosion paint

Adjust the height of the forks so that they are about 100mm-200mm from the ground

But now technological development has offset some of its shortcomings

Management inspection ① Forklifts should be regularly maintained and inspected to prevent fatigue and wear of parts, and to detect potential hidden dangers in time before serious damage occurs

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

BYD all electric forklift maintenance- Regardless of whether the battery has obvious temperature changes during the charging process, the electrolyte will not be turbid, which extends the service life

At the same time, because electrical components are often contaminated with water vapor, short circuits, leakage and other accidents are prone to occur

To calculate how much aisle width to reserve for an electric hydraulic forklift, you must first know a formula: right-angle stacking aisle width = forklift minimum turning radius + forklift front overhang + forklift fork/pallet length + safety distance

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

We all know that the quality of batteries varies due to the size and technical R&D strength of manufacturers

In addition, the all-electric transport trucks of electric forklift manufacturers are also equipped with high-pressure explosion-proof oil pipes and throttling safety valves to ensure the safe descent of the forks

Each electric pallet truck has a parts service life statistics table, which specifically records the start of use time and running time (in hours) of each wearing part

Reversing 1

Fast charging speed, it can be charged in 1-3 hours, which can save time for enterprises The semi-electric forklift factory tells us that electric pallet stackers are divided into two types: full-electric pallet stackers and semi-electric pallet stackers

This is especially true on a slope, otherwise there is a risk of rollover

, which are mainly used in docks, factories and other workplaces

Standing driving, walking, side driving, guard plates, pedals all have different variables

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info