91偷拍视频,日韩国产欧美精品,成年性午夜免费视频网站

BYD China Electric Forklift Operation Guide Latest -

Finally, the fork is retracted and the loading platform falls back to the low position

Today, the electric transport truck manufacturer will tell you how to prevent electric pallet truck malfunctions The electric transport truck manufacturer reminds that the forklift should be lowered to the lowest position and the power supply should be disconnected after the work is completed

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

Iron batteries are fully enclosed and do not require manual maintenance and servicing, and do not require regular refilling of electrolyte

Environmental protection, hygiene and high safety: The shell material is made of ABS engineering plastic or aluminum alloy, which meets the requirements of EU ROHS standards

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

Forklifts equipped with high-performance compact electric drive axles can increase the battery capacity by 40% without changing the volume of the entire vehicle, so as to meet customers' higher performance requirements

If there is any abnormal sound, perform fault detection in time and do not operate with faults

The system has different power modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more energy-saving and environmentally friendly

Of course, practice makes perfect, but it also takes time

"Cobalt-free" and "low lithium content" achieve the environmental compatibility of the battery and greatly reduce the cost of waste disposal The wheel groove wear shall not be greater than 10% of the original size

BYD China Electric Forklift Operation Guide Latest -

After stopping using the electric pallet truck, turn off the key switch and remove the key

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

It is also called a palletizing forklift

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

※ The brake function is normal

Consideration of the company's own costs The development of its industry is closely linked to the application and breakthrough of new technologies The following subdivided industry applications are to understand the technical advantages of BYD new energy forklifts When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time

(8) When operating, forklifts must comply with factory traffic regulations and maintain a certain safe distance from the vehicle in front

BYD China Electric Forklift Operation Guide Latest -

according to the instructions of the WCS (Warehouse Control System) warehouse control system

Let's not talk about other things

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; 8

Because the company has many agents and distributors across the country and has a high brand awareness, it is well known and trusted by many customers

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

The system integration and coordination efficiency of the explosion-proof electric transporter is high, and the wires, cables, etc

The mast of the reach truck can move forward along the track inside the leg with the lifting device to facilitate forking the goods

As the name suggests, a warehouse forklift is a forklift designed for handling goods in warehouses Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging Electric truck manufacturers tell us that the advantages of electric pallet trucks are actually very obvious, and they can be used in various occasions

If the operator mistakenly operates the direction backward and the body does not have time to avoid, the operating arm and the body will collide, the control switch will be closed, and the electric pallet truck will brake urgently

The era of manual handling is gone forever, so the purchase of electric forklifts is an inevitable result

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info