av网站网址,97超碰97,男人深夜网站

BYD reach-type lithium battery forklift charging flow chart -

The brake function is when the manipulator arm is near the uppermost or lowermost end, and the brake is automatically applied when the power is cut off

Finally, let me introduce you to the mast inclination angle

Check the turn signal; 5

(7) When the vehicle is carrying cargo and traveling uphill or downhill at an angle exceeding 7 degrees and at a speed higher than first gear, the brakes must not be used unless in special circumstances

9% that year and 38% in 2018

The weld height should not exceed 1-2mm above the substrate plane

They have the advantages of labor saving, energy saving, environmental protection, high efficiency, safety and reliability, and low noise

Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection

This means that electric forklift manufacturers can obtain more energy and greater braking torque in actual use to achieve the purpose of speed operation

Note: The above sales volume includes domestic sales and overseas sales

's industrial vehicle intelligent terminal and vehicle management system are all key component technologies in electric forklifts

The temperature difference between the inside and outside of the cold storage will cause the vehicle body to "sweat" and produce condensed water, which will cause the structural parts to rust and damage easily

Due to the differences in the level of scientific and technological strength of various countries, there are also great differences in the application of new energy in forklifts

②Maintain good ventilation during charging, and smoking and using open flames are strictly prohibited

BYD reach-type lithium battery forklift charging flow chart - It should also be noted that no matter what brand of electric forklift, some valves or parts have high requirements for cleanliness and need to be cleaned regularly to keep them clean

They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

As the control technology of electric forklifts continues to improve, the functions of the products are becoming more complete, and the operation of the equipment is becoming more flexible and convenient

(6) It is prohibited to pick up goods with a fork at high speed or to use the fork to collide with hard objects

Electric transport truck: 1

It is understood that in recent years, enterprises such as Anhui Heli and Hangcha Group have been continuously increasing their investment in core component technology

If you still have questions, you can consult the electric transport truck manufacturer Humanized handle design: Focusing on the user's height, body shape and hand shape, the handle design is also designed to maintain human health and high-frequency work efficiency, greatly improving the user experience High-performance wear-resistant silent wheels: Advanced technology wheels, with humanized operating experience, and silent performance allows space users to rest assured without being disturbed

Step 7: Reverse and leave the working position

Because lithium batteries have many advantages over traditional lead-acid batteries, their use in the forklift industry will inevitably have a strong impact on the original forklift market structure

The combined effects of subtropical, humid tropical, marine climate environment and industrial waste gas and dust cause corrosion and damage to the parts of internal combustion forklifts

Clean the lifting chain, chain shaft and add lubricating oil

BYD reach-type lithium battery forklift charging flow chart -

"It is difficult to see the position of the forklift when it is lifted or lowered, especially for warehouse forklifts

The air humidity reaches 100%, and essence is produced on the surface of the motor Automation level of electric trucks and manual trucks Electric transport trucks are mainly used to transport goods quickly There are three main reasons for this problem The pallet truck manufacturer reminds that if a problem is found, it should be checked step by step to solve the problem faster

, Ltd

Stable and reliable

A fork-reach-forklift refers to a forklift in which the shelf drives the fork forward and moves it beyond the front wheel to operate

They are widely used in national economic sectors such as stations, ports, airports, factories, warehouses, etc

Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

Before buying, you should consult the merchant about the service life

Charging voltage is too high Phenomenon: The light bulb is easy to burn out during the charging process, and the battery electrolyte is consumed too quickly

If the goods are stacked, we also need to consider the size of the shelf and other factors If the lifting height is too high, whether it is a three-section mast or a two-section mast, the mast height is about 2

At present, most batteries used in forklifts are lead-acid batteries, but they are gradually being replaced by lithium batteries

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info