国产人交视频xxxcom,天天弄天天操,激情拍拍拍

BYD counterbalanced battery forklift maintenance and repair schedule flow chart -

An explosion-proof electric forklift is an electric forklift specially designed for working in explosion-proof environments

Direct handling costs can be reduced by more than 25% compared to manual handling

If someone ignores the warning, the operator must stop the counterbalanced electric forklift operation

Before repair, calibrate the mast of the electric forklift to maintain its inherent straightness

Manual forklift

Usually pay attention to the following points: 1

Next, the electric transport truck manufacturer will talk to you about the factors that determine the price of the electric transport truck, so that you can refer to it when purchasing Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly

After years of practical experience and market accumulation, BYD Forklift has become a leader in logistics and handling solutions in many industries, and has been highly recognized by customers, helping the green development of logistics and industrial acceleration of industry enterprises

Forklift is a non-manpowered tool for transporting goods in warehouses

The fork deflection detection error shall not be higher than the maximum design deflection of the fork

BYD counterbalanced battery forklift maintenance and repair schedule flow chart -

The second is to refer to the manufacturer's positioning

It has stronger power and can completely replace internal combustion forklifts

Electric forklifts store energy in batteries and work with electric drive

Check and adjust the brake system and add grease to the movable joints

In addition, iron batteries can be fast-charged in 1 hour and can be used at any time without affecting the battery cycle Before the unmanned forklift enters the fork, it first uses the sensor to detect the presence of cargo on the shelf and verify the correctness of the lifting height to ensure safe entry; ⑤ The unmanned forklift is equipped with a gyroscope

In terms of load-bearing, manual trucks rely on manpower, so its load capacity takes into account the human tolerance range, while electric trucks rely on electricity and drive wheels, so in this respect, the load capacity of electric trucks is greater than that of manual trucks

Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to operate in narrow spaces

5-5 tons

Warehouse forklift is a practical tool commonly used in warehouses

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1 The humidity of the buffer zone can be controlled with the help of a dehumidifier, or the temperature can be controlled by isolating the loading and unloading area to ensure a lower humidity The high-quality electronic control system is easy to use and can be controlled easily

BYD counterbalanced battery forklift maintenance and repair schedule flow chart - There are many ways to classify forklifts: according to the structural type and characteristics of the forklift, the mass that the forklift can lift, the movement mode of the forklift, etc

Tilt the joystick to tilt the mast so that it is in a vertical position

Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices

Finally, let me introduce you to the mast inclination angle

Regardless of the brand of electric forklift, if it is a lithium battery, it is necessary to regularly check whether the electrical socket can be used normally and whether the battery casing is damaged

The price of imported forklift products is slightly higher Technological innovation is needed to address and solve various technical problems of cold storage forklifts 4

Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

Although the diesel engine of an internal combustion forklift is more reliable and powerful, the cost of diesel is high, and the exhaust emissions can easily pollute the environment; the cost of electric forklifts is much lower than that of other fuels, and there is no exhaust and low noise, which meets the environmental protection requirements advocated by the country The motor carbon brush of the DC motor is a spare part, and the economic cost and maintenance economic development cost increase 3

If you still have questions, you can consult the electric transport truck manufacturer

The handle design conforms to the principles of ergonomics

Don’t easily believe a salesperson’s opinion The installed warning lights and voice reminders and other functions keep safety around It is already very difficult to find a traditional internal combustion forklift on the market

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info