一级性视频,一区二区三区在线观看av,亚洲制服av

How to operate BYD cabinet forklift-

Warehouse staff have to operate and record at the same time, which may lead to negligence, errors and omissions, and even affect the subsequent work; Improve accuracy: Inaccurate inventory of cargo locations will cause difficulty in finding goods during picking, disrupt picking routes, and thus reduce picking efficiency and accuracy; Improve operational efficiency: If it is impossible to monitor the internal warehousing logistics in a timely manner, and there is a lack of analysis of product data and shipping order data, warehousing management will be difficult and operational efficiency cannot be guaranteed

Sharp turns are prohibited to reduce the impact force when turning to prevent the connection between the rigid structural parts of the enterprise from breaking

Then, we need to check whether the wheels of the truck are severely worn or loose

Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

Turn on the key switch

Disadvantages: Electric transport trucks must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive

It has low cost, but low storage efficiency and poor scenario applicability

Counterbalanced forklift AGV is mainly used for raw material distribution on production lines, transportation of semi-finished products and finished products, and palletizing in warehouses and docks, replacing manual labor for simple and frequent operations, thereby improving work efficiency

The principle of lifting goods on a fully electric pallet truck is the same as that of a semi-electric pallet truck

Use both hands to push the control handle backward to between 0°-90° Electric forklifts are small in size and much easier to operate than internal combustion forklifts

How to operate BYD cabinet forklift- 6

Therefore, once the mast of the forklift is found to be deformed, it must be repaired in time

SH), Robot (300024

(2) When an electric pallet truck encounters an obstacle, it should not force its way through How to operate a forklift How to drive a forklift First enter the forklift operator's room, then fasten your seat belt and start the forklift

The penetration rate of new energy forklifts such as zero-carbon emission hydrogen fuel is also growing

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same It is strictly prohibited to load and unload the counterbalanced forklift manually to avoid safety problems

Anti-slip requirements for cold storage environment The humidity in the cold storage is relatively high, the ground is slippery, and there may even be ice, which can cause the forklift to slip during braking

(4) Turn the key switch to the off position

The AGV navigation system, vehicle system, warehouse management system, dispatching system, management system and other software systems were jointly developed by Anhui Yufeng, Hefei University of Technology, Chinese Academy of Sciences and other intelligent unmanned robot technology teams

How to operate BYD cabinet forklift- (5) Readjustment of air gap: The rated air gap Z will increase due to wear At the same time, users are encouraged to install safety monitoring devices on forklifts in use in accordance with the requirements of the new version of the regulations to improve safety

The more common types of internal combustion forklifts include heavy-duty forklifts, container forklifts, off-road forklifts, etc

Electric truck manufacturers hope that everyone will pay attention to this

Under the general trend of "energy saving and environmental protection", specialization, automation, intelligence and new energy technologies have become major opportunities for the development of the forklift industry

Cause of the accident: Construction team leader Xu violated the company's "Special Operations Safety Production Management System" and arranged for workers who were not qualified to drive a forklift to drive a forklift to carry out operations in violation of regulations Its significance is to tell buyers its ability to travel on raised ground or over foreign objects

Electric transport trucks are no exception

Then, a design difficulty of this type of unmanned forklift, namely the hydraulic synchronization problem, is proposed from the two aspects of mechanical structure and hydraulic system

The whole vehicle structure is shown in Figure 2 Even if the fork of the electric transport truck can pass through the socket of the double-sided pallet, it cannot lift (3) After unloading, the forks should be lowered to the normal driving position before driving

What should I pay attention to when using an electric transport truck? What should I pay attention to when using an electric transport truck? Electric transport trucks are also called electric pallet trucks in the industry

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info