少妇极品熟妇人妻200片,亚洲男人网,日本精品αv中文字幕

Is BYD's workshop-specific forklift a special equipment?-

Another very common problem with all-electric truck batteries is the corrosion of the positive plate grid

Be careful! Unauthorized driving is not allowed

The cold resistance can reach minus 40°C, and it can work normally at high temperatures up to 60°C

At present, most lithium battery forklifts are still using lead-acid battery bodies, which do not give full play to the small size and high specific energy characteristics of lithium batteries

Overloading or partial loading of goods is strictly prohibited

It has stronger power and can completely replace internal combustion forklifts

Check whether the synchronous motor rotates flexibly and whether there is false friction

They are not affected by severe cold or hot environments, including working in some environments with poor lighting, etc

Mast: At present, most electric forklifts have adopted wide-view masts, and the lifting hydraulic cylinders are placed on both sides instead of in the middle (2) When an electric pallet truck encounters an obstacle, it should not force its way through

When there are obstacles or pedestrians on the route, the vehicle will automatically stop or give way, reducing the bumps and damage associated with handling, ensuring that the materials are transported to the designated location in good condition, and greatly reducing the uncertainty caused by manual forklifts

It will be much easier to drive after mastering it

Electric forklift It uses electric motor as power and battery as energy

It is durable and can last up to 8-10 years under normal use; 5 After the engine is started, it usually has enough warm-up time to operate at low speed and low load until the engine, transmission, hydraulic system and heated oil are finally driven

Is BYD's workshop-specific forklift a special equipment?- The polyester tire with steel mesh can ensure that the forklift has sufficient driving force and good handling effect even on the frozen ground

Unmanned forklifts, also known as AGV handling robots, do not require manual driving, have high positioning accuracy, and effectively reduce labor intensity

There is still a big gap between the penetration rate of forklift electrification at home and abroad Under the background of low-carbon and environmental protection, the electrification transformation and upgrading of the forklift industry has become an inevitable trend of industry development

It is understood that BYD forklifts provide customized logistics solutions for logistics companies (8) When operating, forklifts must comply with factory traffic regulations and maintain a certain safe distance from the vehicle in front

Check and adjust the brake system and add grease to the movable joints

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

There is an emergency power-off button on the truck body, also called an emergency stop button, and on the handle are the fork lift button and the forward and backward knob

280g/cm3; adjust the engine oil in time, install insulation measures when the equipment is working on site, install oil preheating device when necessary, and start the engine regularly to preheat each part of the working system

In recent years, many brands have appeared with pallet trucks, and the forklift accessories products are endless, which allows us to have a deeper understanding of the needs of the Chinese market

Long service life, strong power, can completely replace traditional engines

Use both hands to push the control handle backward to between 0°-90°

Finally, let me introduce you to the mast inclination angle

The reach truck is similar to the leg-type forklift in that the center of gravity of the goods falls within the support plane of the vehicle, so it has good stability

Is BYD's workshop-specific forklift a special equipment?- Fork: To improve the efficiency of cargo storage and retrieval and reduce the width of the storage channel, this unmanned forklift is designed with a two-way telescopic fork to complete the cargo placement and retrieval by sideways fork entry

The hydraulic synchronization problem is a difficulty in this type of design

The reduction in contacts can effectively reduce the maintenance cost of electronic components

(3) After unloading, the forks should be lowered to the normal driving position before driving

Unmanned forklift: ① A sensor installation frame is designed on the loading platform, and a cargo size over-limit sensor is installed

Below, the BYD forklift editor will tell you how to operate a BYD forklift

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

The forklift adopts an all-steel structure as a whole, and the surface is coated with anti-corrosion paint

You don't need to measure this data yourself, the electric forklift manufacturer will provide it to you

6 Simple classification: Electric transport trucks are powered by electric lifting and electric movement; manual transport trucks are powered by manual hydraulic lifting and human pulling

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info