亚州激情视频,久久久久夜,无码人妻精品一区二区三区9厂

BYD container forklift maintenance and operation process video- Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices It will be much easier to drive after you become proficient

Although the diesel engine of an internal combustion forklift is more reliable and powerful, the cost of diesel is high, and the exhaust emissions can easily pollute the environment; the cost of electric forklifts is much lower than that of other fuels, and there is no exhaust and low noise, which meets the environmental protection requirements advocated by the country

② Check and tighten any screws, nuts, and battery cable connections that may be loose

After charging is completed, reset the power socket

In terms of load-bearing, manual trucks rely on manpower, so its load capacity takes into account the human tolerance range, while electric trucks rely on electricity and drive wheels, so in this respect, the load capacity of electric trucks is greater than that of manual trucks

Do not shut down and park the machine in the cold storage, otherwise it may cause damage to the hydraulic system and electrical system

The successful development of Sony's lithium-ion battery in 1992 is mainly used in portable electronic devices that we use in our daily lives

"No cobalt" and "lower lithium content" complete the battery's environmental compatibility and significantly reduce waste disposal costs

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator Electric forklift manufacturers recommend that companies choose electric forklifts with the same load capacity that have a smaller tire outer diameter If other personnel at the work site do not keep a safe distance from the forklift, they must stop working immediately; 2 The all-electric transport trucks of electric forklift manufacturers have the following advantages: the imported rims used for the load-bearing wheels are more durable; the optional side arm guards are safer and more reliable; the advanced Hall sensors replace the traditional micro switches; the wheels are made of imported polyurethane, suitable for various ground surfaces, and can travel quietly; the reverse emergency forward button is installed to improve the anti-collision safety factor; the handle design is ergonomic and more comfortable to use

From the above, we can see that both electric pallet trucks and manual trucks have many advantages and inevitable disadvantages

BYD container forklift maintenance and operation process video-, which have been widely praised

When charging, unplug the power socket and connect the charger plug to the movable socket with a handle

The axle has a compact structure and complete functions

The results show that the side stacking unmanned forklift designed based on the scheme in this paper effectively reduces the width of the stacking channel and improves the storage capacity and storage efficiency

Figure 4 shows the pictures of the 3D virtual prototype and the test prototype

To ease the pressure and anxiety of warehousing and logistics operations, we must first speed up the pace to improve the efficiency of warehousing and logistics work

It is widely used in petroleum, chemical, coal, metallurgy, transportation, shipbuilding and other industries

lead-acid), so no parameters need to be changed to manage the battery

It takes some effort to choose a high-quality electric transport truck, and it is best to choose a large manufacturer with a well-known brand

AC drive motor, without carbon brush, basically requires no maintenance, reducing maintenance costs

However, in modern society, hydraulic electric pallet forklift manufacturers are BYD, Jungheinrich, Heli, Hangcha, Ruyi, Noli, Xilin, Xilin, Noli, Cape, Jindun and other brands

The unmanned forklift moves to the loading point by moving straight, sideways, turning, etc

The emergence of lithium batteries has added a highlight to the development of the forklift industry! What functions does BYD forklift have? BYD forklifts are all equipped with BYD's independently developed iron battery technology, which has the characteristics of maintenance-free, low use cost, 1 hour fast charging, and can be used at any time

There is still a big gap between the penetration rate of forklift electrification at home and abroad Under the background of low-carbon and environmental protection, the electrification transformation and upgrading of the forklift industry has become an inevitable trend of industry development

BYD container forklift maintenance and operation process video-

2-week inspection Forklift users should spend a few minutes each week cleaning the machine, paying special attention to removing any entanglements such as silk, linen, and rags around the wheels and axles

This puts higher demands on the product line layout, product design and technological innovation capabilities of related companies, such as achieving lighter weight, better load-bearing capacity and higher cost-effectiveness through lightweight design 4

The outriggers are relatively high and have two wheels at the front end

Is only horizontal transportation required, or is there stacking, picking, or sorting? Are the items being transported special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the length of the forks, and the number of mast levels

Clean the gear box and change the gear oil

The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump

Important reminder, new forklift safety standards are coming soon! Safety Technical Regulations for Special Motor Vehicles in the Factory (TSG 81—2022) The new regulations will officially come into effect on December 1, 2022! New regulation changes 1 The regular inspection cycle of forklifts has been adjusted from 1 year to 2 years

Why do forklifts still rust even though they follow the correct use and maintenance methods? Is it because the forklift is of poor quality? In fact, there are many reasons for forklift corrosion

Undoubtedly, under the general background of product structure adjustment in the whole industry and accelerated development of forklift electrification, relevant enterprises will break through the technical and performance limitations of electric forklifts, provide more abundant models, and bring more possibilities for industry applications

The structure of electric forklifts: The body is the main structure of the forklift, which is generally made of steel plates of more than 5mm

They are industrial handling forklifts, which are generally used in factory workshops, ports, stations, and airports to load and unload goods

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info