最新av中文字幕无码专区,91春色,日韩精品激情

BYD warehouse forklift charging process video- When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

The maximum operating current of the motor is 3 times the rated voltage, the allowable time is 1 minute (forward and reverse rotation is 30 seconds), and its output torque is 4

5 to 5

Electric forklift

(3) Release the operating arm and it will automatically return to the parking brake position

As an intelligent vehicle robot, unmanned forklifts fully integrate forklift technology and AGV technology, and occupy an increasingly important market in the field of intelligent three-dimensional warehousing[2]

Here we introduce to you a counterbalanced forklift AGV independently developed and produced

It is an indispensable component in power and energy storage batteries

Parking (1) Release the direction select switch

The normal height is about 3 meters, and the high height is more than 10 meters

BYD warehouse forklift charging process video- Violators will be severely punished The vehicle runs ahead and the speed is controlled by the rotation angle of the direction speed control button (5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects The torque and higher instantaneous speed

Avoid overloading or partial loading of goods

Diesel forklifts have the advantages of strong power, high speed, and high efficiency

Full Chinese display instrument: The advanced Chinese display instrument can display the operating status of vehicles in real time, provide vehicle fault alarms and prompts, and intelligently provide the most accurate real-time information for operation and maintenance personnel, realizing personalized operation functions

When the equipment is working, operate the bucket, blade and various control devices slowly, and prohibit high throttle, impact, scraping, shoveling and pushing, etc 1

After arriving at the destination, the chassis is lowered by hydraulics, and the goods fall to the ground with it, so the transport vehicle can be easily pulled out, eliminating the complicated process of manual handling

Comply with other requirements stipulated in the Safety Technical Specifications for Special Equipment Operators of Forklift Certificates They are especially suitable for food, fishery, medical, chemical and other places

For specific classification, please refer to the previous two articles: [Forklift Knowledge] Forklift Classification (V): Class III Electric Transporter [Forklift Knowledge] Forklift Classification (VI): Class III Electric Stacker The third category vehicles are different from the second category vehicles

BYD warehouse forklift charging process video- Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

(4) Side forklift: It uses a diesel engine as its power source and has a load capacity of 3

The lifting, lowering and turning of the forklift are driven by the hydraulic system

Product Advantages Improve the performance of electric forklifts, matching the power and performance of fuel-powered forklifts, and saving energy

Comparing the work efficiency between the two, the electric transport truck relies on the power system to easily lift and complete the loading, unloading and carrying tasks, and the electric transport truck only needs manual control of the handle to complete the work, and the continuous working time is longer than that relying on manpower

Hangcha Group also invested in Zhengzhou Jiachen Electric Co

There is an emergency power-off button on the truck body, also called an emergency stop button, and on the handle are the fork lift button and the forward and backward knob

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

Even if the fork of the electric transport truck can pass through the socket of the double-sided pallet, it cannot lift

Tilt the joystick to tilt the mast backward to prevent the cargo from falling while the electric forklift is driving

However, although the electric lifting equipment produced by foreign manufacturers in the past was of good quality, it was too expensive to be popularized

The all-electric transport trucks of electric forklift manufacturers have the following advantages: the imported rims used for the load-bearing wheels are more durable; the optional side arm guards are safer and more reliable; the advanced Hall sensors replace the traditional micro switches; the wheels are made of imported polyurethane, suitable for various ground surfaces, and can travel quietly; the reverse emergency forward button is installed to improve the anti-collision safety factor; the handle design is ergonomic and more comfortable to use

Fault 2: Sliding down when loaded When an electric transport truck slides down while loading, it is usually due to oil leakage in the oil pipeline or oil joints

When the inspection agency conducts regular (initial) inspections, the inspection items should include the inspection of safety monitoring devices

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info