有色影院,手机在线不卡av,h片网站在线观看

BYD electric high-lift forklift maintenance and maintenance methods- The vehicle runs ahead and the speed is controlled by the rotation angle of the direction speed control button Freight is also very convenient, the body is agile, and most importantly, it is very environmentally friendly

5 to 5

The lifting device also comes from the motor to drive the hydraulic pump station to push the hydraulic oil inside the hydraulic cylinder to achieve lifting, rising and falling

Prevent vehicles from carrying people; 7

Now we are promoting environmental protection everywhere

Be in good health and meet the special physical requirements of the forklift operation you are applying for; 3

An electric forklift with excellent quality and simple operation is also very important What are the operating procedures for electric forklifts? The current forklift field may already be the world of electric forklifts (9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

Unmanned forklift: ① A sensor installation frame is designed on the loading platform, and a cargo size over-limit sensor is installed

However, the height of the forklift is not fixed

BYD electric high-lift forklift maintenance and maintenance methods-

Ambient temperature: -20℃～+40℃ 4

(3) Ensure that the battery pack has sufficient power

For the electric transporter itself, its configuration, load, maximum lifting height, fork width, etc

Check whether the synchronous motor rotates flexibly and whether there is false friction

The ultra-low temperature characteristics are significantly better than lead-acid batteries, and lithium batteries are more suitable for use in northern areas or frozen storages; 6

Speed regulating device It operates normally at 24V voltage and the speed is adjusted by electronic control

And the magnetic density is higher

The normal height is about 3 meters, and the high height is more than 10 meters

The motor carbon brush of the DC motor is a spare part, and the economic cost and maintenance economic development cost increase 3

Check the lifting, driving and hydraulic pump carbonization

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

It focuses on the use needs of different industries, conducts in-depth research and development, and provides the most suitable industry-customized product services

In addition to the above conditions, when choosing the battery for the electric transport truck, we must consider the price of the forklift and our own budget

In order to make the electric transport truck run smoothly during use and the fork lift smoothly, we should add lubricating oil to the transport truck, which can reduce the friction of various components and prevent damage to the parts caused by excessive wear

BYD electric high-lift forklift maintenance and maintenance methods-

Continuous breakthroughs in key technologies For a long time, the core three-electric (electronic control, motor, battery) technology of electric forklifts has been an important factor that has troubled the development of electric forklifts in my country, especially the electronic control system, which is the core component of electric vehicles, has long been monopolized by foreign brands

Each thing has its own use

0 to 45

Electric forklift: 0

As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

Today, the market is becoming more and more mature, and manual pallet trucks are comfortable, labor-saving and money-saving, and can be called economical and easy-to-use handling tools

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

With the development of production technology, drivers no longer have to worry too much about the safety hazards caused by the quality problems of electric transport trucks, and it is also very easy to master the operation of transport trucks

2 Manual forklift Manual forklifts are mainly designed for handling goods in warehouses

The electric transport truck manufacturer tells you that single-sided pallets include Sichuan-shaped pallets and nine-legged pallets

They are generally small and use hydraulic structures to reduce the difficulty of manual operation

Disadvantages: Manual transport trucks rely on human power to pull, which consumes manpower, requires effort when the ground is uneven, and has low transport efficiency

(3) High and low temperature performance: It can be used normally at 60℃, without the need for additional air conditioning equipment or charging temperature compensation

If necessary, use a soft, lint-free, clean white towel to clean the carbon powder on the surface of the phase change groove and the motor commutator

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info