999av,91中文字幕在线观看,超清av在线播放不卡无码

BYD warehouse dedicated electric forklift maintenance-

24% over the previous year, especially electric walk-behind storage vehicles, which still maintained a relatively high growth

Nylon wheels: They are mostly used in low-speed vehicles such as manual transport trucks

3 When operating a reach truck, try to use less long-term and long-distance acceleration 5

Choose a regular merchant The second-hand forklift market is very complicated

The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump 3

5 meters

The other is to fix the wheel axle with an elastic pin, which needs to be knocked out with a punch

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles Why do forklifts still rust even though they follow the correct use and maintenance methods? Is it because the forklift is of poor quality? In fact, there are many reasons for forklift corrosion

BYD warehouse dedicated electric forklift maintenance-

They have the advantages of labor saving, energy saving, environmental protection, high efficiency, safety and reliability, and low noise

The fifth step is to slowly lift the fork

Moreover, unlike manual trucks and semi-electric trucks, it is equipped with a standing board, which allows you to stand and drive without using manpower

Wide applicability: It can be used for various purposes such as logistics distribution centers, warehousing stackers, material transfer yards, etc

Transportation and storage This all-electric stacker must be placed in a horizontal position during transportation and storage to prevent oil spillage

Which type of transporter is more suitable for them? Below, the electric transporter manufacturer will analyze the pros and cons of the two

The electric transport truck has an ergonomically designed handle head, which is beautiful and simple

Then check carefully to determine the crack boundary, and drill a ￠5-￠8mm limit hole 10mm beyond the boundary

The cold resistance reaches minus 40℃, and it can work normally under high temperature to 60℃

So, no matter how much the forklift costs, how to use and maintain the electric forklift in winter? Next, the electric forklift manufacturer will tell you

Anti-rust and anti-corrosion measures The temperature difference between inside and outside of the cold storage will cause the forklift to "sweat" after leaving the cold storage

BYD warehouse dedicated electric forklift maintenance-

Improve corporate image: More environmentally friendly, no pollution, no corrosion, no lead

Its principle is to transmit three-phase AC power to the fixed stator winding, generate a rotating magnetic field to induce the closed rotor winding to generate current, and the rotor rotates along the direction of rotation of the rotating magnetic field under the action of electromagnetic force

In contrast, BYD Forklift, which started to enter the electric forklift field as early as ten years ago, should not be underestimated in its deep layout in the industry

This is mainly due to the high proportion of self-produced parts

Considering that there is no unified standard for calculating the height of electric forklifts, electric forklift manufacturers may not be able to match the shelf height with the lifting height of the forklift, and companies are required to provide detailed data based on their own circumstances

The wheel groove wear shall not be greater than 10% of the original size

Tilt the joystick to tilt the mast so that it is in a vertical position

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

Except for the forklift body, all parts of the forklift meet the explosion-proof requirements

How to improve Reduce the error rate: At present, many warehouse management still relies on manual work

It is also worth mentioning that most of these technical research and development work is carried out with the participation or even leadership of the main engine factory, and more attention is paid to targeted technical research and product design from the perspective of improving vehicle performance

This product breaks through the concept of traditional battery forklifts, combines the advantages of internal combustion forklifts and electric forklifts, has a low center of gravity, compact structure, comfortable driving, green and environmentally friendly, can be flexibly operated in a small space, and its main performance indicators have reached the international advanced level

It is strictly prohibited to load and unload the counterbalanced forklift manually to avoid safety problems

If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info