欧美日韩黄,91亚洲精华国产精华精华液,av无码国产精品色午夜

BYD three-axle electric forklift maintenance requirements-

Considering the accuracy and flexibility of forklift operation, a side shifter is required

Forklift wheel installation: 1

It is not allowed to operate with a single fork; 4

Use your thumb to slowly turn the direction speed control button forward

(4) Hydraulic distribution valve, which consists of a valve body, a lifting hydraulic cylinder valve core, a tilting hydraulic cylinder valve core and a safety valve Paper tube pallet truck is used for transporting warp beams of water jet looms, and can also be used for transporting paper tubes and paper rolls

If it is lower than the bottom of the distilled water bottle, add water

There are two ways to connect the load-bearing wheel Before lifting the forklift, make sure that the forklift has completely penetrated the bottom of the pallet The AGV navigation system, vehicle system, warehouse management system, dispatching system, management system and other software systems were jointly developed by Anhui Yufeng, Hefei University of Technology, Chinese Academy of Sciences and other intelligent unmanned robot technology teams

The forks of a battery truck are usually raised to a height of 200 MM, which is just enough to lift the pallet off the ground and keep a distance from the ground, allowing for free movement

If you have the key, take it out and give it to the custodian of the electric vehicle

If the road conditions are good, the vehicle will continue to accelerate Warehouse staff have to operate and record at the same time, which may lead to negligence, errors and omissions, and even affect the subsequent work; Improve accuracy: Inaccurate inventory of cargo locations will cause difficulty in finding goods during picking, disrupt picking routes, and thus reduce picking efficiency and accuracy; Improve operational efficiency: If it is impossible to monitor the internal warehousing logistics in a timely manner, and there is a lack of analysis of product data and shipping order data, warehousing management will be difficult and operational efficiency cannot be guaranteed

BYD three-axle electric forklift maintenance requirements-

However, most controllers of battery forklifts need to be imported, the price of forklift lithium batteries is also relatively expensive, and the price of circuit boards is also higher than that of diesel forklifts

According to the response from Anhui Yufeng Warehousing Business Department, many customers are now calling to inquire about matters such as electric transport truck agents and electric pallet truck wholesales

For example, the oil disc valve cover is not easy to compact due to the large contact area, which may cause oil leakage

Maintenance-free: no need to add water, no pollution such as dripping, corrosion, etc

How to choose? It is not enough for enterprises to consider their own needs, but also to consider how to use them with electric transport trucks

The reach truck is similar to the leg-type forklift in that the center of gravity of the goods falls within the support plane of the vehicle, so it has good stability They are not suitable for use in food factories, printing factories, and the clothing industry

Due to the differences in the level of scientific and technological strength of various countries, there are also great differences in the application of new energy in forklifts

warn! Do not operate a forklift with serious functional defects that endanger safety According to the power mode, forklifts can be divided into internal combustion forklifts and electric forklifts In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle8-46 tons, including small tonnage below 5 tons, large tonnage of 5-18 tons, and heavy load of 20-46 tons The forklift adopts an all-steel structure as a whole, and the surface is coated with anti-corrosion paint

BYD three-axle electric forklift maintenance requirements-

Even if the fork of the electric transport truck can pass through the socket of the double-sided pallet, it cannot lift

, Linde (China), and Lonking Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

warn! Wheel slip is not allowed Turn on the key switch

(10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers

Power Management: Equipped with the world's leading power management system for real-time monitoring of the battery, it can perform high-precision calculations on the charge status to ensure that the battery is always working in a safe state, and increase the battery cycle

After charging is completed, reset the power socket Notice! Operating the electric pallet truck at low voltage for a long time will damage the battery life Therefore, work efficiency becomes higher and accuracy is greatly improved according to the instructions of the WCS (Warehouse Control System) warehouse control system

Use both hands to push the control handle backward to between 0°-90°

Hydraulic system 1

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info