亚洲国产成人在线视频,国产视频手机在线观看,亚洲天堂精品视频

BYD clamp forklift maintenance and maintenance methods - 1 The principle of lifting goods on a fully electric pallet truck is the same as that of a semi-electric pallet truck Full Chinese display surface: The technologically advanced Chinese display surface on the screen can display the operating status of vehicles in real time, provide vehicle fault alarms and prompts, and the intelligent system can provide accurate real-time information for operation and maintenance personnel, maintaining personalized operation effects

② Check and tighten any screws, nuts, and battery cable connections that may be loose

Another manifestation is that the discharge capacity will decrease significantly

There are three operating modes: walking, standing and riding

They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance It is not allowed to operate with a single fork; 4

Cause: The charger's operating voltage is out of regulation or faulty, or the battery is faulty

Regardless of the price of the forklift, if the electric forklift has been working in a low temperature environment for a long time, it should be placed in a warm indoor environment for a period of time before charging it indoors

(7) When the vehicle is carrying cargo and traveling uphill or downhill at an angle exceeding 7 degrees and at a speed higher than first gear, the brakes must not be used unless in special circumstances

In November 2018, Hangcha Group released a new product, the XC series new energy electric forklift, developed in cooperation with Contemporary Amperex Technology Co

Usually pay attention to the following points: 1

BYD clamp forklift maintenance and maintenance methods -

When the ambient temperature is 40℃, the relative humidity should not exceed 50%

It is not allowed to use inertia to unload; 3

1 To break this situation, we must take the path of differentiated competition Power Management: Equipped with the world's leading power management system for real-time monitoring of the battery, it can perform high-precision calculations on the charge status to ensure that the battery is always working in a safe state, and increase the battery cycle In life, we think whether electric forklifts are worth buying is a very objective question

Continuous breakthroughs in key technologies For a long time, the core three-electric (electronic control, motor, battery) technology of electric forklifts has been an important factor that has troubled the development of electric forklifts in my country, especially the electronic control system, which is the core component of electric vehicles, has long been monopolized by foreign brands

Forklift work safety requirements: 1

The first is three-dimensional warehousing based on rail stackers, which is mainly used in scenarios with long aisles and high shelves

In order to reduce the occurrence of failures and extend the service life of the forklift, regular maintenance is very necessary

Overall design of product structure The overall design of the product structure is carried out according to the modular concept, mainly considering three aspects: cargo lifting, cargo forks, and vehicle chassis: Cargo lifting: To facilitate the expansion of the lifting height in the future and reduce the center height of the vehicle, this unmanned forklift uses a telescopic gantry to achieve the lifting and lowering of the cargo platform

Electric forklift It uses electric motor as power and battery as energy

Find out the warranty period for new vehicles

BYD clamp forklift maintenance and maintenance methods -

In 2020, the proportion of domestic electric forklifts was only 51%

Among forklift companies, in addition to BYD, which was involved in lithium-ion forklift technology earlier, since 2018, many mainstream forklift OEMs such as Anhui Heli, Hangcha Group, and Noli have also actively introduced the application of lithium batteries Product layout continues to deepen In fact, my country's electric forklift market has shown a high growth trend since 2017, with sales increasing by 43

Prevent vehicles from carrying people; 7

When the AGV is driving at low speed with a full load and the deviation level is large, the distance from the instantaneous center to the vertical axis of the AGV is an important parameter to determine the space required for the vehicle's turning operation

Nowadays, electric forklifts have become the material handling equipment favored by the majority of customers in the industry

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1 3

Nowadays, electric forklifts have become the material handling equipment favored by the majority of customers in the industry

, Ltd

Electric transport trucks generally have two specifications: 685mm wide, about 1200mm fork length, applicable to pallet size 1200*1200mm; 550mm wide, about 1100mm fork length, applicable to pallet size 1000*1000mm After many R&D improvements, the durability, reliability and applicability of electric forklifts have been significantly improved, completely surpassing internal combustion forklifts

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info