精品国产一区二区三区av色诱,韩漫动漫免费大全在线观看,在线观看日韩精品

BYD all-electric forklift lithium battery components diagram-

In the long run, the price of things with technical content must go down

At present, AGV products include stacking AGV, counterbalanced forklift AGV, pallet forklift AGV, reach forklift AGV, three-way stacking AGV, heavy-load traction AGV, outdoor unmanned traction AGV and customized non-standard conversion unmanned handling vehicles

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

Check the appearance

The requirements of the logistics industry for the forklift industry are high strength, long service time, large load, stable performance, high degree of automation and intelligence, and low noise

There is a tortoise and rabbit adjuster on the handle, and the tortoise speed and rabbit speed can be switched freely

Compared with traditional lead-acid batteries, lithium batteries have incomparable advantages The maximum operating current of the motor is 3 times the rated voltage, the allowable time is 1 minute (forward and reverse rotation is 30 seconds), and its output torque is 4

The battery pack can be replaced quickly: just put in a new battery to complete the entire charging process (about 10 minutes); 3

③ Check the wear of the brushes in the hydraulic pump motor and replace any brushes that may not meet the requirements to maintain good contact

In this regard, the customer had tried to install only a single-motor drive axle, but this did not solve the problem because the single-motor drive could not reach the same power level as a traditional internal combustion forklift

The hydraulic synchronization problem is a difficulty in this type of design

Internal combustion forklift Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy-duty forklifts, container forklifts and side forklifts

Because the electric transport truck is a very common warehouse electric pallet truck, it can be seen in many occasions

BYD all-electric forklift lithium battery components diagram-

, so as to avoid objects flying up and injuring people

All operating functions can be realized by simple buttons on the handle

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors

Double triangle lever frame: decomposes the stress, strongly supports the fork to lift smoothly, and rejects deformation of the adjustable push rod

Generally, it is one year or 1,000 hours (whichever comes first) When the electric forklift is operating in the warehouse, it should be avoided that the forklift is driving and lifting at the same time 9 Semi-electric stacking forklift refers to a wheeled transport vehicle that loads, unloads, stacks, and transports palletized goods over short distances After stopping using the electric pallet truck, turn off the key switch and remove the key Increase the stacking height and improve the utilization rate of stacking space

They have been tested and mass-produced by more than 30 vehicle companies including Anhui Heli, Hangcha Group, Longgong, Noli, Baoli, etc

Notice! Operating the electric pallet truck at low voltage for a long time will damage the battery life

BYD all-electric forklift lithium battery components diagram-

Power socket assembly When charging the battery, unplug the socket with the handle and plug it into the plug on the charger

(5) Choose the correct driving direction and control the speed at an ideal level At present, most lithium battery forklifts are still using lead-acid battery bodies, which do not give full play to the small size and high specific energy characteristics of lithium batteries Considering that there may be cylindrical goods, large cotton bales and other goods in the warehouse that need to be handled, it is necessary to add attachments such as grippers, and also consider whether hydraulic pipelines are reserved when the forklift leaves the factory

The principle of lifting goods on a fully electric pallet truck is the same as that of a semi-electric pallet truck

The above is the advantages and disadvantages of the two types of transport trucks manufactured by electric forklift manufacturers

They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

Battery The battery is fixed in the battery box, with a voltage of 24V and a standard capacity of 210Ah

0 tons, and the width of the working channel is generally 3

(2) Do not raise the forks too high when driving

Warehouse forklifts are mainly designed for handling goods in warehouses

If the lifting height of the fork does not reach the required height, add hydraulic oil

For the electric transporter itself, its configuration, load, maximum lifting height, fork width, etc

What are the advantages of electric transport vehicles What are the advantages of electric transport vehicles? 1

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info