国产高跟黑色丝袜在线,欧洲国产伦久久久久久久,九九色视频

BYD Manufacturing Special Forklift Maintenance and Operation Flowchart - As the name suggests, electric transport trucks are electrically powered for lifting and driving In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor

4 At the same time, Gongyan Industry Research Institute also provides industry data, industry research, policy research, industry chain consulting, industry maps, industry planning, feasibility analysis, business plans, IPO consulting and other products and solutions

They rely on human transportation and handle operation, which is simple and flexible, environmentally friendly and energy-saving

We can also see some in daily scenes

The humidity of the buffer zone can be controlled with the help of a dehumidifier, or the temperature can be controlled by isolating the loading and unloading area to ensure a lower humidity

, Ltd

Shorten the maintenance cycle of lubrication points to prevent early wear of lubrication points

Impact of temperature difference inside and outside the cold storage Cold storage forklifts need to work alternately between low temperature and normal temperature environments

It is already very difficult to find a traditional internal combustion forklift on the market Check and adjust the battery sulfuric acid ratio, clean the battery surface, and tighten the battery terminals

If it is higher than the standard value, it indicates that the charging voltage is too high

The longer it is open to the outside world, the longer it will have the longest and strongest vitality

BYD Manufacturing Special Forklift Maintenance and Operation Flowchart - The fully electric pallet truck uses a 24V electronic system, and a set of integrated circuit controllers to steplessly adjust its speed to ensure a relatively stable speed and acceleration during driving Otherwise, it is easy to damage the ground and forklift wheels, and it will cause accidents such as cargo collapse, damage to buildings and injuries to personnel

Check the lifting chain to see if there are any cracks or damage

Warehouse forklift Warehouse forklifts are mainly designed for handling goods in warehouses

If it is insufficient, charge it in time

Charging voltage is too high Phenomenon: The light bulb is easy to burn out during the charging process, and the battery electrolyte is consumed too quickly

Of course, other forklift manufacturers could not sit still as their small electric forklifts sold so well, and quickly launched their own brands of small electric forklifts

Cause: The charger operating voltage is out of regulation or faulty

The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm

The product used in this solution is the 610X in the 600 series wheel drive planetary gearbox, which best meets customer needs and can be connected to high power density electric motors

When the truck starts, make sure there is no one nearby and no obstacles or potholes on the road

Consider the issue of pneumatic tires and solid tires

When the vehicle starts and the speed increases, keep the accelerator pedal steady

BYD Manufacturing Special Forklift Maintenance and Operation Flowchart - Whether solid tire, drum spreader, transverse or similar

The electronic scale pallet truck is designed and developed for mobile weighing, combining cargo handling and weighing into one, and is suitable for use in the food industry

To choose which type of tool, you still need to base it on the actual situation

The forks of a battery truck are usually raised to a height of 200 MM, which is just enough to lift the pallet off the ground and keep a distance from the ground, allowing for free movement

Stable and reliable

(8) When a forklift is operating, it is prohibited for people to stand around the forks to prevent the cargo from falling and injuring people

If you add stackers in three dimensions, different heights, gantry structures, legs, legs, forward movement, etc

1 If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident What should you pay attention to when buying a forklift? There is no industry standard in our forklift market yet

With more than 10 years of industry experience, continuous development for various electric applications, and innovative scientific and technological achievements, we are committed to designing, developing and producing customized power transmission solutions for our partners

The maximum lifting height [3] refers to the maximum vertical distance between the horizontal section of the fork or the upper surface of the lifting platform and the ground; the maximum deflection of the fork end refers to the maximum linear displacement of the fork end in the vertical direction when the fork is at rated load and maximum travel At the same time, it can meet the production needs of various electric forklifts and non-standard forklifts

After forking the goods, it is lifted a short distance and then the mast returns to its original position along the track inside the leg

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info