国产精品高清一区二区不卡片,中文字幕在线三区,av噜噜在线

BYD high-rise storage lithium battery storage maintenance plan table -

After stopping using the electric pallet truck, turn off the key switch and remove the key

The driver has to stretch his neck to barely find the correct position based on experience! If it is not accurate, the goods will tip over After no abnormality is found, the fork is extended to pick up the goods

With the development of production technology, drivers no longer have to worry too much about the safety hazards caused by the quality problems of electric transport trucks, and it is also very easy to master the operation of transport trucks

Slowly release your thumb, the direction and speed control buttons will automatically return to their original positions and the vehicle speed will decrease

In addition, iron batteries can be fast-charged in 1 hour and can be used at any time without affecting the battery cycle

The three verticals and three horizontals in the "New Energy Vehicle Industry Development Plan (2021-2035)", the "three verticals" refer to pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles

First, the altitude of the electric forklift workplace should not exceed 1200m

5Minimum turning radius

For example, the forklift is equipped with a 540Ah battery

The maximum weight of goods that the automatic guided vehicle can bear: the load capacity range of AGV is 5T-1300T

So what are their specific functions? Let the BYD forklift editor share with you: What are the functions of BYD forklifts? 1

But now technological development has offset some of its shortcomings

Through the accumulation of recent years, the product series has gradually enriched, the technical level has been continuously improved, and the products are sold well at home and abroad, leading a new trend in the industry

Due to the nature of the goods themselves Forklifts have large carrying capacity, large volume and weight

BYD high-rise storage lithium battery storage maintenance plan table -

The forklift mast cannot rise Most of the problems with the forklift's mast lifting are caused by oil leakage

?The damping shock-absorbing spring does not need to be adjusted frequently, and can actively adjust the vertical drive unit according to the road conditions, reduce the impact of the ground on the drive unit, balance the force on the driving balance wheel, and improve the smooth operation efficiency

So how do we troubleshoot these faults? The following editor will give you a brief introduction

Before continuing to operate, the direction selection switch must be restored to the middle position

Overall design of product structure The overall design of the product structure is carried out according to the modular concept, mainly considering three aspects: cargo lifting, cargo forks, and vehicle chassis: Cargo lifting: To facilitate the expansion of the lifting height in the future and reduce the center height of the vehicle, this unmanned forklift uses a telescopic gantry to achieve the lifting and lowering of the cargo platform

The battery box cover is easy to open, making it convenient to add distilled water or electrolyte to the battery

If the vehicle has a braking function, the kinetic energy during deceleration can be recovered ②The battery is the energy source of the forklift Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required Market demand for cold storage forklifts is growing With favorable cold chain policy environment and market prospects in my country, as well as the rise of the Internet and financial innovation, e-commerce companies have entered the fresh food market, driving the rapid increase in demand for cold chain supply chains

The ambient temperature should not exceed 40°C

A heater should be installed in the cab

BYD high-rise storage lithium battery storage maintenance plan table - The second reason is that the charging and discharging current is too large, and the plate is twisted and deformed

Electric forklifts are now very commonly used logistics and warehousing equipment

It is widely used in petroleum, chemical, coal, metallurgy, transportation, shipbuilding and other industries

We also have our counterbalanced forklift, which is one of the most widely used types of warehouse forklifts

The door frame shall not be deformed or welded off

It has good maneuverability and can complete various tasks, reducing the investment in other transportation costs 3 Especially in ports, logistics and warehousing, pharmaceutical, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts

Especially when operating in aquatic product cold storage, it will also be corroded by salt

with ZF (China) Investment Co

The beetle design of the fork reduces the wear of the loading and unloading tools during the loading and unloading process

As a new energy electric forklift, it has the advantages of energy saving, environmental protection and simple maintenance

In logistics, warehouses, factories and other places, transport trucks are needed to transport goods

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info