狠狠天堂,在线无码免费网站永久,久久影视精品

BYD CPD35 Lithium battery forklifts Picture Use the DC voltage range of the multimeter to measure the voltage across the battery AGV is applied to forklifts, and the AMS automated management system, AGV hardware equipment and management system (NDC) are established to build a full-process logistics management system, realize dynamic monitoring of warehouse goods, and realize the traceability and visualization management of logistics transportation It has the advantages of small size, light weight, high efficiency and long life; 2

It also has the advantages of ultra-low noise and ultra-low vibration

Overloading is not allowed; 5

The soft brush should roll freely in the hand box

The second is to refer to the manufacturer's positioning

Understand usage requirements There are many types of forklifts

When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift

The beetle design of the fork reduces the wear of the loading and unloading tools during the loading and unloading process

It can provide enterprises with complete warehousing solutions, allowing enterprises to purchase electric transport trucks that are suitable for them and have the highest cost-effectiveness

?What are the advantages of BYD lithium battery forklifts? (1) Long life: Under normal charging and discharging conditions, after 4,000 cycles, the capacity retention rate is greater than 75%; the battery life can be maintained for more than 10 years; the forklift does not need to replace the battery during its life cycle

According to WITS (World Industrial Truck Statistics), in 2020, electric forklift sales accounted for 87% of the European forklift market, 69% of the US electric forklifts, and the global average was over 60%

BYD CPD35 Lithium battery forklifts Picture

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

However, although the electric lifting equipment produced by foreign manufacturers in the past was of good quality, it was too expensive to be popularized The DC motor must be configured1*1

The other is to fix the wheel axle with an elastic pin, which needs to be knocked out with a punch

It is also equipped with a maintenance-free smart lithium battery with fast charging and random charging functions, so that it does not need to be deliberately maintained like conventional electric transport trucks

When turning the buttons, pay attention and do not turn violently and accelerate quickly

Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load

For more detailed research and analysis of this industry, please see Gongyan

The double-sided pallet is made of co-polypropylene, which cannot be formed in one go and must rely on later welding

Forklifts are generally equipped with pneumatic tires as standard, but they are prone to blowouts and are not wear-resistant, increasing maintenance costs

BYD CPD35 Lithium battery forklifts Picture

The new generation of electric forklifts will have better maintainability and operability, and the display and fault diagnosis systems will be more complete

Electric transport forklift manufacturers remind that when working in multiple shifts, motor-driven warehouse forklifts need to have backup batteries

Large-tonnage electric pallet trucks have the advantages of energy saving, no exhaust emissions, and environmental protection

Manual Pallet Truck The manual pallet trucks manufactured by electric forklift manufacturers need to rely on human power to walk and are operated by handles

Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

, Ltd

But now technological development has offset some of its shortcomings

In the daily maintenance process, we need to do a good job of maintaining various gaskets

When entering and leaving factories, workshops, and warehouses, the speed should not exceed 5km/h

("Zhengzhou Jiachen") to promote the technical advantages of its electric forklifts, warehouse vehicles and intelligent industrial vehicles in motor control, battery management, and integrated control of the whole machine, and continuously improve the product quality and core competitiveness

Users should choose the corresponding model of electric forklift after understanding the weight of the cargo they carry

Unlike internal combustion forklifts, electric forklifts are recommended to be used on hard, flat surfaces

It is understood that the battery production base of Xin Power now uses the latest fully automated production line, which has the characteristics of high precision, high speed, and high intelligence, to ensure the precise control of intelligent automation during the battery production process and to ensure the consistency requirements of battery production

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info